Catskill-craftsmen 53017 Manuale Utente

Assembly InstructionsModel 53017Designer Island with Flat Panel DoorsGENERAL:1. You have purchased model 53017. 2. Should you need assistance or need

STEP 10A. Insert and tap caster sockets with hammer until the teeth grab the wood. DON’T POUND SOCKET FLAT OR CASTER SHAFT WILL NOT ENTER.B. Insert ca

For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmen’s Butcher Block Oil. Our Butcher Block Oil is avai

TOPTOPBack Panel (1) P/N: BP-53017CABINET PARTS 53017Cabinet Top (1)P/N: TT-53017Side Panels (2) P/N: SP-53017Middle Shelf (1)Has Edge Banding P/N: MS

1 3/4” Phillips Flat Head Bolts (8) 1 1/4” Phillips Flat Head #8 Screw (12) 7/8” Truss Head Machine Screw (8) 5/8” #6 Pan Head Screw (4) 1/2” Phillips

5/8” #7 1 1/4” #85/8” #7 5/8” #7 The glides look almost alike; however, they are stamped CR for cabinet right and CL for cabinet left.Left SideFrontRi

STEP 2A. Lay back panel at on a smooth surface with holes up.B. Attach side panels with 1 3/4” machine screws (bolts) and hex nuts. After inserting b

STEP 4A. Attach the drawer back to the drawer sides with four 1 1/4” #8 screws. Make sure parts are aligned as in illustration 4A.B. Insert drawer bot

3/4” PinTop Front BraceInsertSTEP 5Take the 2 front braces and tap/insert one 3/4” steel pin into each end of both braces until seated. About 3/8” wil

STEP 7 A. Tap/insert ONE 1 1/2” pin into each end of both doors. DON’T OVERDRIVE PINS! Pins should stick up about 1/2” when seated.B. Attach the magne

STEP 8 A. Install doors by inserting pins in the door tops into the holes in the long edge top front brace. B. Place one washer on each of the door pi